Showing posts with label Tutorial. Show all posts
Showing posts with label Tutorial. Show all posts
Saturday, November 28, 2015
Charge Your Smartphone Faster
The lengths of time the charge smartphones are indeed sometimes make bad. Especially for you in daily activity that deals with Smartphones. However, do you know that there are ways to do so faster charging time? But of course this way will not make the process of charging to be as fast as lightning. But at least you’ll feel the difference in charging time than does the Guide as the following:
Turn off your smartphone
This is the most powerful tool in accelerating the process of charging the battery. Logically, in a dead condition, meaning there is no unused power so that the charging process is faster. In addition, the condition of the dead battery will not be as hot when lit so there will be more durable.
Turn on Airplane mode
If you don't want to turn off your smartphone, you can activate Airplane mode. This Mode uses very low battery consumption because turning off the main feature that uses few resources, such as a phone (3 g) network, mobile data, GPS, and WiFi.
Do not use smartphone
Screen by using the power of the smartphone. Therefore, avoid smartphones to check over and over again. If you want to quickly fill to capacity, it's not fiddling with to just see the notifications, or even while playing games.
Use the proper charger
Try to always use the built-in charger that has been optimized to charge the battery. If you use another charger, use a charger that has a greater output.
Use electric plugs
Charging battery will be faster if done via electrical plugs are available. Using the USB cable is not the right solution if you questioned the length of time charging. Power is taken via the USB port has a smaller output (between 0.5-0.9 Ampere) while using the default charger has output 2 Ampere.
Turn off the feature/application
If you are a busy person and often gets phone calls, maybe turn it off while charging the battery could make the tough call. The solution, turn off some features or applications that proved many drains the battery.
Influence of temperature
Make sure that the charging device; avoid conditions that could cause overheating. For example, placed near other electrical components or exposed to direct sunlight. A hot battery will result in a decline in its ability to store energy. The more heat it will be ever more extravagant and the longer the charging time.
Two USB ports
If forced to fill through the micro USB cable, you can use a cable that has two ports. Plug the computer into two port and make sure there is no flow of power to another USB port. This process will be quicker than using a single USB port.
Battery calibration
A battery that is too often used to 0% could shorten the age which resulted in not completing the battery charging. Save battery immediately fill out on at least 5% condition. Did the battery calibration at least once a month with how to use it to 0% and the contents of up to 100% in the condition die? This way will make the batteries more durable and healthy. A healthy battery will be loaded faster and not quickly discharged than the already-ugly.
Replace battery
If you have already tried all ways but still charging lasts long, there could be problems on the battery itself. If so, we recommend that you immediately replace battery new quality that has no effect on other components.
Charge Your Smartphone Faster
Pick Your Device Automatically Aggregated The Lumia Hardware
Mobile phones (Nokia) Lumia you experience a hang? Or the screen does not respond to touch at all? Don't panic just yet, there are ways that can be done before you take it to a service center. The following will show you the ranging from the easiest way to ' rather dificult. Who knew that one of those ways could be the solution for the problem you are experiencing. This method can be applied on several series Lumia are there in the market today. Here's how:
Soft Reset
The easiest way is to turn off the device and turn it on again.
If you use a mobile phone with a battery that could be removed (like Nokia Lumia 520), open the back cover and disconnect the battery. Wait until a few moments before being reassembled.
If you use the battery that blends with the casing (like Nokia Lumia 920), you can press and hold the Volume Down button and the Home button simultaneously for a few seconds until the phone off by itself.
If your phone is still problematic, it could be damaged and the operating system can only be done by way of a hard reset.
Factory/Hard Reset
How to reset these can be done in two ways, namely through the menu and physical buttons. Keep in mind that doing this reset will erase data and applications that have been there before.
1. via the menu
This way most simple and can be done if the system is still functioning.
Go into the settings menu > About > Reset Your Phone. Wait until the process is complete, which takes about 5 minutes.
2. using physical buttons (the first way)
How can this be done if the system experienced a ' hang ' or could not access the menu. Doing it this way in accordance with the steps.
Turn off the device. Press and hold the Power button, do not release until the device causing shakes (vibrate). After shaking off, directly off the Power button.
Press and hold the Volume Down button, do not release until the screen displays an exclamation mark. After performing, off button Volume Down.
Then press the Volume Up and off.
Press the Volume Down and loose.
Press and release the Power button.
Press the Volume Down and loose.
Afterwards, the device will perform a hard reset. Wait for about 3 to 5 minutes until the process is complete by itself.
3. using physical buttons (both ways)
An alternative way to do that is to press and hold down the Volume Down + Camera + Power simultaneously until the phone cause vibration (vibrate), then release the Power button only with the other key is still stuck. After 5 seconds, then release all buttons.
Thursday, November 26, 2015
Epson L110, L210, L300, L350 and L355 Ink Level Reset
You are the user of Epson L110, L210, L300, L350 and L355? We trick this time you should try. Experience this time is about How to Reset Ink Level Epson L110, L210, L300, L350 and L355 without SN ID Inks. Let's read this the post.
Epson Printer Series L110, L210, L300, L350 and L355 are an official of the vendor printer Epson infusion. If the Ink Level Epson L110, L210, L300, L350 and L355 show the position vacant / empty, then usually you have to enter SN ID listed at Epson Ink bottle.
Now the trick is about How to Reset Ink Level Epson L110, L210, L300, L350 and L355 without SN ID Inks. So you no longer need to buy some ink when the SN ID Ink Epson Ink Level L110, L210, L300, L350 and L355 show the position vacant / empty.
How to Reset Ink Level Epson L110, L210, L300, L350 and L355 without SN ID Ink:
- Download Program Ink Level Reset Epson L110, L210, L300, L350 and L355 by google drive link here, dropbox link here.
- Ink level reset program is called WIC Reset Utility. Install the program on your computer. The trick: double click on WIC (x32). Exe => Next 4x => Install => Finish.
- After Reset Utility Run WIC you have installed. Do not forget your printer should be switched ON and connected to the computer.
- Keep in mind: WIC Program can only be reset Utility Epson Ink Level L110, L210, L300, L350 and L355 the empty marked with "FUN".
- After the WIC Reset Utility in the open, select the type of your Epson printer. Then click Reset Inks ==> Continue: click YES ==> Click Done.
- After that, Turn off the Epson L110, L210, L300, L350 and L355 you. And then turn it back on, then you'll Epson Ink Level reset and ink level full again without having to enter the ID code SN Epson Original Ink.
Good luck
Epson L110, L210, L300, L350 and L355 Ink Level Reset
Wednesday, November 25, 2015
Show a Watermark on the Document in Microsoft Office Word 2013
Microsoft Office is a popular application for the Windows operating system. Now Microsoft Office Word comes with the latest Microsoft Office 2013 which certainly comes with more features. Microsoft Office 2010 versions of Microsoft Office is a productivity suite for Windows operating systems, is the successor of Microsoft Office 2010 and included an extended file format support, user interface updates and support for a touch of the new features.
Microsoft Office system suitable for the 2013 IA-32 and x 64 Windows 7, Windows Server 2008 R2, Windows 8, Windows 8.1 etc.
The version of Microsoft Office 2013 comes included on Windows devices RT. Development started in the versions of Microsoft Office 2010 and ended on October 11, 2012 when Microsoft Office 2010 was released to manufacturing.Microsoft released Office 2013 for general availability on January 29, 2013. This version contains new features such as support for the integration of the online service (including the SkyDrive, Outlook.com, Hotmail, Skype, Yammer and Flickr), improved support for the Office Open XML format (OOXML) and OpenDocument (ODF) and Portable Document Format (PDF) and support for multi-touch interface.
Microsoft Office 2010 comes in twelve different editions, including three editions to retail outlets, two editions to volume licensing channel, five editions is available through subscription-based Microsoft Office 365 web applications Edition program, known as Office Web Apps and Office of the RT Edition made for tablets and mobile devices.
The Watermark is useful as a marker of status of a particular document. It is useful to indicate that the document is specific or confirms the content of the document. For example, an important document that you can add to text Confidential. The Watermark can be shown in the form of text or images on a background are vague. This function also exists in Word 2007, but the trick is a bit different from Word 2013. Here's how:
1. Watermark text
Open the document to add the Watermark by clicking the File menu Open >. Click the tab Design > Watermark. Select one of the available templates, and will automatically perform the writings on the background.
2. Undo Watermarks
If you want to remove the Watermark, click the tab Design > Watermark. Click on the option Remove Watermark.
3. Homemade text Watermark
In addition to the form of the text is available, you can also make the text itself. To make it: Click Watermark > Custom Watermarks. Click Text Watermark. From the available columns, you can specify the font, size, color, and text that will be displayed. Click Apply and Close.
4. Watermark image
The trick is similar to the previous step. However, select Picture Watermark > Select Picture. Navigate to the location where the image is to be displayed. In order to display the image was disguised, tick on the option Washout.
Subscribe to:
Posts (Atom)