Monday, November 23, 2015
Canon IP2770 Blink Reset
The stylish PIXMA iP2770 combines quality and speed for easy photo printing at home. 2pl ink droplets, 4800 x 1200dpi resolution and Chromalife 100+ ensure crisp, sharp text and colour printing that lasts.
You may have experienced an error in your Canon printer. Don’t worry, there is a solution How to Reset Canon IP2770 Error 5B00
You may have experienced an error in your Canon printer. Don’t worry, there is a solution How to Reset Canon IP2770 Error 5B00
Don't forget to turn off your download manager, download successful.
Enter Service Mode: iP2770
- The Printer off and the power cord attached.
- Press RESUME button 2 seconds
- Then press the POWER button until the green light turns on (when pressing the POWER button, button ... hold RESUME button)
- Then a release RESUME button, but don't loose POWER button.
- While the POWER button still depressed, press the RESUME button 4 times. The Led will turn on turns orange with green flame last green. (don't get mistaken 4 x because the printer will die miserably, but its nature while also)
- Release both buttons at the same time.
- The Led will blink briefly and then going to a GREEN flame.
- The computer will detect the new device, disregard it.
- This state of Affairs indicates printer iP2770 in SERVICE MODE and ready to be reset.
Then run the Resetter v1074 iP2770:
- File Resetter iP2770 Extract it.
- Prepare 2 paper at the printer (to print at the time this process is reset).
- Run the program Resetter iP2770
- Click "PLAY", then the printer will be an ongoing process, then it will print one page iP2770 with inscription "D =" 000.0
- Click the "EEPROM Clear".
- Then click the "EEPROM", and the printer will print the result iP2770 Resetter. One of his writings is needed:
- "TPAGE (TTL =: credits)"
- Turn off the Printer by pressing the POWER button.
- Completed
Good luck
Canon IP2770 Blink Reset
Canon IP2770 Blink Reset