Pages

Saturday, November 7, 2015

Canon MG2170, MG2270 and MG5270 Printer Reset

Thank you for visiting our informationtutorial15. blogspot.com blog. At this time we will try sharing again about how to Reset Canon MG2170, MG2270 and MG5270 Error P07 and E08.

How to RESET MG2170, MG2270 and MG5270

Indications:
When the MG2170, MG2270 and MG5270 is switched on, it will immediately appear error P07/E08 on its LCD panel.
And when we do print command, then on the monitor will perform "The Ink Absorber is Almost Full". Canon MG2170, MG2270 image caption and MG5270 P07 and Error E08 on the screen monitor as follows:

Canon MG2170, MG2270 and MG5270 Printer Reset figure

Then how do I cope with my Canon MG2170, MG2270 and MG5270 Error P07 and E08.

How to Reset Canon MG2170, MG2270 and MG5270 Error P07 and E08:
  1. Turn on your Printer Canon MG2170, MG2270 and MG5270, then in its LCD panel will appear error P07/E08, and there is a description of "The Ink Absorber is Almost Full" on your monitor.
  2. Download Resetter of Canon MG2170, MG2270 and MG5270 at this link.
  3. Canon MG2170 printer, MG2270 and must be in a State of SERVICE MG5270 MODE. Do I read the next step.
  4. Turn off Canon MG2170, MG2270 and the error P07 MG5270/E08 by pressing the power button. Do not unplug the power cable
  5. Press and hold the STOP/RESET button followed by pressing the POWER button. So the two buttons depressed position.
  6. Off button STOP/RESET but don't loose POWER button.
  7. In the circumstances the POWER button still depressed, press the STOP/RESET button as much as 5 times.
  8. Then release both buttons at the same time. Then the Canon MG2170, MG2270 and MG5270 will is in Service Mode.
  9. LCD Panel Canon MG2170, MG2270 and MG5270 will blank/dark and your computer will detect new hardware. Ignore just ...
  10. You're still with us, the next step of Extract and run the Service Tool you download results above 3400.
  11. In Clear ink absorber counter menu select Play then click the SET on the right.
  12. Ink absorber counter in menu select Play then click the SET on the right.
  13. Then click EEOPROM. then the printer will print a 1 page.
  14. Canon MG2170 printer, MG2270 and the error P07 MG5270/E08 will be normal again.
Canon MG2170, MG2270 and MG5270 Printer Reset
Good Luck
Posted by at
Labels: , , ,